Line Switching Cross Laser Level

Product Description

Line switching Cross Laser Level with Built-in Rechargeable Lithium Battery

2200mAh rechargeable Li-ion battery with type-C ports and power indicator for much more convenient charging

1. For the newly delivered laser level tool set, the working surface should be flat and smooth, and free of sand holes, air holes, bumps, scratches, rust and other defects. No paint peeling, rust and obvious defects are allowed on the non working surface.

2. The line site laser level is used to check the straightness of the guide rails of various machine tools and other mechanical equipment, the parallelism of the relative positions of the parts, and the horizontal and vertical positions of the equipment installation. Laser level is the most basic inspection tool in machine tool manufacturing, installation and repair.

3. The machine inclines within 4 ° and is automatically leveled.

Customized Services

Products Feature

Self-leveling Mode & Manual/Tilt Mode

Self-leveling mode
Unlock pendum button to turn on the self leveling model and you will see the straight laser light flash when place model at angle that beyond self leveling range 3.5° ± 0.5°.

Manual mode

Lock pendum button to turn on manual/tilt mode,put Line switching Cross Laser Level at any angle you want and you will see the laser beam will blink every 3-5 seconds,that is for reminding you of its nonself-leveling status.

Each time the power button is pressed once, the laser tool projects vertical lines,horizontal lines and cross lines in sequence,and users can wave hands to switch laser line or make laser line off.

Paired with a 3.7V/2200mAh lithium battery, the normal working time of the full laser line is 7 hours, and it is also equipped with a Typc-C charging port. This means that even if it has a fast charging function, it can fully charge in only 2.5 hours after running out of battery, which is very practical for users who need to work frequently and quickly for a long time.